Home › BODY › EXTERIOR › REAR BUMPER

REAR BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL REAR BUMPER COVER UPPER LH


2. INSTALL REAR BUMPER COVER UPPER RH


3. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH


    E103122E02
  1. Connect the connector.

  1. Install the rear combination light assembly with the 2 screws and the 2 pins.



4. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH


5. INSTALL REAR BUMPER SIDE SUPPORT NO.2 LH


6. INSTALL REAR BUMPER SIDE SUPPORT NO.2 RH


7. INSTALL REAR BUMPER BRACKET CENTER


8. INSTALL BACK STEP SUB-ASSEMBLY


9. INSTALL ULTRASONIC SENSOR NO.1 (w/ Clearance Sonar)


10. INSTALL ULTRASONIC SENSOR NO.2 (w/ Clearance Sonar)


11. INSTALL ULTRASONIC SENSOR RETAINER NO.1 (w/ Clearance Sonar)