Home › BODY › EXTERIOR › FRONT DOOR GLASS WEATHERSTRIP

FRONT DOOR GLASS WEATHERSTRIP > INSTALLATION

for Preparation Click here



1. INSTALL FRONT DOOR GLASS WEATHERSTRIP ASSEMBLY OUTER


2. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY (w/ Electric Mirror)


    B113705E01
  1. Install the outer rear view mirror with the 3 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Install the clamp.

  1. Connect the connector.



3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (w/ Electric Mirror)

HINT:
Refer to the instructions for installation of the front door trim board sub-assembly. (w/ Power Window: Click herew/o Power Window: Click here)



4. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY (w/o Electric Mirror)


    B112363
  1. Install the outer rear view mirror with the 3 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    B102872E01
  1. Engage the 3 clips and install the front door lower frame bracket garnish.



6. RESET POWER WINDOW REGULATOR MOTOR (w/ Power Window)
Click here