Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO ANTENNA POLE

RADIO ANTENNA POLE > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER


2. REMOVE RADIO ANTENNA POLE


    I100839E01
  1. Disconnect the connector and 2 clamps.

  1. Tie a string to the radio antenna pole.

    HINT:
    Leave the string in the vehicle. It will be used when installing the pole.



    E103061
  1. Remove the 2 screws and radio antenna pole.

  1. Untie the string from the radio antenna pole.