DTC P0500/42 Vehicle Speed Sensor "A" |

| DTC No. | DTC Detection Conditions | Trouble Areas |
| P0500/42 |
|
|

| 1.CHECK OPERATION OF SPEEDOMETER |
Drive the vehicle and check if the operation of the speedometer in the combination meter is normal.
|
| ||||
| OK | |
| 2.INSPECT ECM (SPD VOLTAGE) |
![]() |
Shift the transmission gear selector lever to the neutral position.
Jack up the vehicle.
Turn the ignition switch to the ON position.
Measure the voltage between the terminals of the ECM connectors as the wheel is turned slowly.
| Tester Connections | Specified Conditions |
| SPD (B7-8) - E1 (D1-3) | Voltage generated intermittently |
|
| ||||
| OK | ||
| ||