Home › BODY › SEAT › REAR NO. 1 SEAT ASSEMBLY (for Hold Down Seat Type)

REAR NO. 1 SEAT ASSEMBLY (for Hold Down Seat Type) > DISASSEMBLY

for Preparation Click here



1. REMOVE RECLINING RELEASE HANDLE SUB-ASSEMBLY


    B101720
  1. Using a piece of cloth, etc., remove the snap ring and reclining release handle sub-assembly.

    HINT:
    Use the same procedures for the RH side and LH side.



2. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.1 LH


    B113606
  1. Using a screwdriver, disengage the claw and remove the reclining adjuster release handle No.1 LH.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.1 RH

HINT:
Use the same procedures for the RH side and LH side.



4. REMOVE RECLINING ADJUSTER COVER LH


    B113607
  1. Remove the 2 screws.

  1. Disengage the claw and clip and remove the reclining adjuster cover LH.



5. REMOVE RECLINING ADJUSTER COVER RH

HINT:
Use the same procedures for the RH side and LH side.



6. REMOVE REAR SEATBACK COVER LH


    B103977
  1. Remove the rear seat hinge pin and rear seatback cover LH.



7. REMOVE REAR SEATBACK COVER RH

HINT:
Use the same procedures for the RH side and LH side.



8. REMOVE REAR SEAT HINGE PIN


9. REMOVE REAR SEAT RECLINING COVER NO.2 LH


    B113608
  1. Disengage the 6 claws and remove the rear seat reclining cover No.2 LH.



10. REMOVE REAR SEAT RECLINING COVER NO.2 RH

HINT:
Use the same procedures for the RH side and LH side.



11. REMOVE NO.1 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD


    B101724
  1. Disengage the hook and remove the No.1 seat cushion cover sub-assembly with pad.



12. REMOVE NO.1 SEAT CUSHION COVER SUB-ASSEMBLY


  1. Remove the 14 hog rings and No.1 seat cushion cover sub-assembly.


    B113609E01



13. REMOVE NO.1 SEAT CUSHION PAD


14. REMOVE REAR SEAT HEADREST ASSEMBLY


15. REMOVE REAR SEAT HEADREST SUPPORT


    B101725
  1. Operate the reclining release handle sub-assembly and fold down the seatback onto the seat cushion as shown in the illustration.



    B101726
  1. Open the fastener of the No.1 seatback cover sub-assembly.



  1. Remove the 6 hog rings.


    B113610E01

  1. Operate the reclining release handle sub-assembly and return the seatback to the upright position.



  1. Disengage the 4 claws and remove the 2 rear seat headrest supports.


    B113611



16. REMOVE REAR SEAT HEADREST SUPPORT

HINT:
Use the same procedures for the RH side and LH side.



17. REMOVE NO.1 SEATBACK COVER SUB-ASSEMBLY WITH PAD


18. REMOVE NO.1 SEATBACK COVER SUB-ASSEMBLY


  1. Remove the 6 hog rings and No.1 seatback cover sub-assembly.


    B113612E01



19. REMOVE NO.1 SEATBACK PAD


20. REMOVE REAR SEAT CUSHION SHIELD INNER NO.1 LH


    B113613
  1. Disengage the claw and remove the rear seat cushion shield inner No.1 LH.



21. REMOVE REAR SEAT CUSHION SHIELD INNER NO.1 RH

HINT:
Use the same procedures for the RH side and LH side.



22. REMOVE REAR SEAT RECLINING COVER NO.1 LH


    B101732
  1. Remove the screw and rear seat reclining cover No.1 LH.



23. REMOVE REAR SEAT RECLINING COVER NO.1 RH

HINT:
Use the same procedures for the RH side and LH side.



24. REMOVE NO.1 SEATBACK SPRING ASSEMBLY


    B101733
  1. Remove the 4 bolts and No.1 seatback spring assembly.



25. REMOVE REAR SEAT LEG SIDE COVER


    B101734
  1. Remove the 2 screws.



    B101735
  1. Remove the 2 bolts, 2 brackets and rear seat leg side covers.



26. REMOVE REAR SEAT LOCK HANDLE KNOB


27. REMOVE REAR SEATBACK LOCK COVER


    B101736
  1. Remove the 4 screws and 2 rear seatback lock covers.



28. REMOVE REAR SEAT BELT ASSEMBLY OUTER (w/ Seat Belt)

HINT:
Follow the same procedure as for the fixed seat type.



29. REMOVE REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)

HINT:
Follow the same procedure as for the fixed seat type.



30. REMOVE REAR NO.1 SEAT LOCK ASSEMBLY


    B101737
  1. w/o Seat belt:

    1. Remove the 6 bolts and 2 rear No.1 seat lock assemblies.



    B105594
  1. w/ Seat belt:

    1. Remove the 4 bolts and 2 rear No.1 seat lock assemblies.



31. REMOVE NO.1 SEAT LEG STOPPER HOLDER


32. REMOVE REAR SEAT LEG STOPPER


33. REMOVE REAR SEAT CUSHION HINGE COVER LOWER


    B101738
  1. Remove the 2 rear seat cushion springs.

  1. Remove the 3 E-rings, 3 washers, 3 rear seat hinge pins and rear seat cushion hinge cover lower with No.1 seat leg sub-assembly rear.



    B101739
  1. Remove the 4 screws and 2 rear seat cushion hinge cover lowers.



34. REMOVE REAR SEAT HINGE PIN


35. REMOVE NO.1 SEAT LEG SUB-ASSEMBLY REAR


36. REMOVE SEAT TRACK ADJUSTING HANDLE KNOB


    B101740
  1. Remove the 2 screws and seat track adjusting handle knob.



37. REMOVE REAR SEAT CUSHION UNDER COVER


    B101741
  1. Remove the 11 screws and rear seat cushion under cover.



38. REMOVE WARNING REFLECTOR HOLDER ASSEMBLY


    B101791
  1. Remove the 4 screws and 4 warning reflector holder assemblies.



39. REMOVE NO.1 SEAT LEG SUB-ASSEMBLY


    B101792
  1. Remove the 4 bolts and No.1 seat leg sub-assembly.



40. REMOVE NO.1 SEAT LEG SUB-ASSEMBLY