Home › BODY › SEAT › REAR NO. 1 SEAT ASSEMBLY (w/o Headrest)

REAR NO. 1 SEAT ASSEMBLY (w/o Headrest) > REASSEMBLY

for Preparation Click here



1. INSTALL NO.1 SEATBACK PAD SUB-ASSEMBLY


2. INSTALL NO.1 SEATBACK COVER SUB-ASSEMBLY


    B107562E01
  1. Using hog ring pliers, install the No.1 seatback cover sub-assembly to the No.1 seatback pad sub-assembly with 2 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



    B107560
  1. Close the fastener of the No.1 seatback cover sub-assembly.



3. INSTALL ASSIST GRIP ASSEMBLY (w/ Assist Grip)


4. INSTALL ASSIST GRIP PLUG (w/ Assist Grip)


5. INSTALL NO.1 SEAT LEG SUB-ASSEMBLY


    B107557
  1. Install the No.1 seat leg sub-assembly with the 4 bolts.

    Torque:
    41 N*m{ 418 kgf*cm , 30 ft.*lbf }



6. INSTALL NO.1 SEAT CUSHION PAD


7. INSTALL NO.1 SEAT CUSHION COVER SUB-ASSEMBLY


    B107563E01
  1. Using hog ring pliers, install the No.1 seat cushion cover sub-assembly to the No.1 seat cushion pad with 6 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



    B107564E01
  1. Using hog ring pliers, install the 2 new hog rings.

    NOTICE:
    Be careful not to damage the cover.



8. INSTALL NO.1 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD


9. INSTALL SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Belt)


    B107680
  1. Install the seat lap type belt assembly No.1 with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



10. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)


    B107679
  1. Install the rear seat belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



11. INSTALL REAR SEAT LEG SIDE COVER NO.2 (for Second Row)


12. INSTALL REAR SEAT LEG SIDE COVER NO.3


13. INSTALL RECLINING ADJUSTER COVER RH


14. INSTALL RECLINING ADJUSTER COVER LH