VANE PUMP (for 2KD-FTV) > REMOVAL |
| 1. DRAIN POWER STEERING FLUID |
| 2. REMOVE ENGINE UNDER COVER NO.1 |
| 3. REMOVE ENGINE UNDER COVER NO.2 |
| 4. SEPARATE OIL RESERVOIR TO PUMP HOSE NO.1 |
![]() |
Remove the clip and separate the oil reservoir to pump hose No.1.
| 5. SEPARATE PRESSURE FEED TUBE ASSEMBLY |
![]() |
Remove the union bolt and separate the pressure feed tube assembly.
| 6. REMOVE VANE PUMP ASSEMBLY |
![]() |
Remove the 2 nuts and the vane pump assembly.
Remove the vane pump O-ring from the vane pump assembly.