Home › STEERING › POWER STEERING › VANE PUMP (for 5L-E)

VANE PUMP (for 5L-E) > REMOVAL

for Preparation Click here



1. DRAIN POWER STEERING FLUID


2. SEPARATE FAN AND GENERATOR V BELT


    A071310E01
  1. Loosen the bolt A and nut B, and remove the V belt.



3. SEPARATE OIL RESERVOIR TO PUMP HOSE NO.1


    C106131
  1. Remove the clip and separate the oil reservoir to pump hose No.1.



4. REMOVE PRESSURE FEED TUBE ASSEMBLY


    C106132
  1. Remove the union bolt and separate the pressure feed tube assembly.



5. REMOVE VANE PUMP PULLEY


    C106133E01
  1. Using SST, remove the nut and the vane pump pulley.

    SST
    09960-10010   (09962-01000, 09963-01000)



6. REMOVE VANE PUMP ASSEMBLY


    C106135
  1. Remove the 2 bolts, nuts and the vane pump assembly.