STEERING TORQUE SHAFT > REMOVAL |
| 1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD |
| 2. FIX STEERING WHEEL POSITION |
![]() |
Fix the steering wheel with the seat belt in order to prevent rotation.
| 3. REMOVE ENGINE UNDER COVER NO.1 |
| 4. REMOVE STEERING TORQUE SHAFT ASSEMBLY |
![]() |
Loosen bolt (A) and remove bolt (B), then slide the steering torque shaft assembly.
![]() |
Put matchmarks on the steering torque shaft assembly and the power steering link assembly.
Separate the steering torque shaft assembly from the power steering link assembly.
![]() |
Remove the bolt and slide the steering torque shaft assembly.
![]() |
Put matchmarks on the steering torque shaft assembly and the steering bevel gear assembly.
Remove the steering torque shaft assembly from the steering bevel gear assembly.
| 5. REMOVE STEERING SLIDING YOKE SUB-ASSEMBLY |
![]() |
Put matchmarks on the steering sliding yoke sub-assembly and the steering torque shaft assembly.
Remove the bolt and steering sliding yoke sub-assembly from the steering torque shaft assembly.