Home › BODY › WINDSHIELD / WINDOWGLASS › WINDOW DEFOGGER SYSTEM

WINDOW DEFOGGER SYSTEM > TERMINALS OF ECU

for Preparation Click here



INSPECT HEATER CONTROL NOB NO.2 (DEFOGGER SWITCH)

B102672

  1. Measure the voltage and resistance of each terminal of the connectors.

    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    E (1) - Body ground
    P - BR
    Ground for main power supply
    Always
    Below 1 Ω
    RrDEF (2) - E (1)
    L - BR
    Defogger signal
    Ignition switch ON, Defogger switch OFF → ON
    10 to 14 V → Below 1 V
    IG (3) - E (1)
    L - BR
    Power supply (IG)
    Ignition switch ON
    10 to 14 V
    If the result is not as specified, the defogger switch may have a malfunction.


INSPECT INSTRUMENT PANEL JUNCTION BLOCK

B102673E01

  1. Measure the voltage and resistance of each terminal of the connectors.

    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    DEF (5F-2) - Body ground
    B - Body ground
    Defogger signal
    Ignition switch ON, Defogger switch OFF → ON
    Below 1 V → 10 to 14 V
    +B (5G-1) - Body ground
    B-G - Body ground
    Main power supply (+B)
    Always
    10 to 14 V
    DEFSW1 (5Q-4) - Body ground
    L-R - Body ground
    Main power supply (IG)
    Ignition switch ON
    10 to 14 V
    DEFSW2 (5Q-12) - Body ground
    P-B - Body ground
    Defogger signal
    Ignition switch ON
    10 to 14 V
    If the result is not as specified, the instrument panel junction block may have a malfunction.