EXHAUST PIPE (for Super Long Wheelbase) > INSTALLATION |
| 1. INSTALL EXHAUST PIPE ASSEMBLY TAIL |
Connect the exhaust pipe support, and install the exhaust pipe assembly tail.
| 2. INSTALL EXHAUST PIPE ASSEMBLY CENTER |
Connect the exhaust pipe supports and install the exhaust pipe assembly center and a new gasket with the 2 bolts to the exhaust pipe assembly tail.
| 3. INSTALL EXHAUST PIPE ASSEMBLY FRONT |
Inspect the compression spring.
![]() |
Using vernier calipers, measure the free length of the compression springs.
![]() |
Install the gasket.
Fully insert a new gasket to the exhaust manifold by hand.
Using a wooden block, uniformly strike the gasket so that the gasket and exhaust manifold are properly fit.
Connect the exhaust pipe support, and install the exhaust pipe assembly front and a new gasket with the 4 bolts, 2 compression springs and 2nuts.
| 4. CHECK FOR EXHAUST GAS LEAKS |