Home › ENGINE ยท 2KD-FTV › EXHAUST › EXHAUST PIPE (for Super Long Wheelbase)

EXHAUST PIPE (for Super Long Wheelbase) > REMOVAL

for Preparation Click here



1. REMOVE EXHAUST PIPE ASSEMBLY FRONT
  1. Remove the 4 bolts, 2 nuts, 2 compression springs. exhaust pipe assembly front and 2 gaskets.

  1. Disconnect the exhaust pipe support, and remove the exhaust pipe assembly front and 2 gaskets.



2. REMOVE EXHAUST PIPE ASSEMBLY CENTER
  1. Remove the 2 bolts.

  1. Disconnect the exhaust pipe supports, and remove the exhaust pipe assembly center and gasket.



3. REMOVE EXHAUST PIPE ASSEMBLY TAIL