Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › REAR BLOWER SWITCH (for Cooler)

REAR BLOWER SWITCH (for Cooler) > REMOVAL

for Preparation Click here



1. REMOVE REAR COOLER CONTROL PANEL


    E108775E01
  1. Release the 4 clips and 4 claws, and disconnect the rear cooler control panel.

  1. Disconnect the connector and remove the rear cooler control panel.



2. REMOVE COOLER CONTROL SWITCH KNOB


    E104581
  1. Remove the cooler control switch knob.



3. REMOVE COOLER CONTROL SWITCH ASSEMBLY


    E108776E01
  1. Release the claw and remove the cooler control switch assembly.



4. REMOVE REAR COOLER CONTROL INFORMATION LABEL


    E111314
  1. Remove the rear cooler control information label.