Home › BODY › SEAT › REAR NO. 1 SEAT ASSEMBLY (w/ Headrest)

REAR NO. 1 SEAT ASSEMBLY (w/ Headrest) > REASSEMBLY

for Preparation Click here



1. INSTALL NO.1 SEATBACK SPRING ASSEMBLY


2. INSTALL NO.1 SEATBACK PAD


3. INSTALL NO.1 SEATBACK COVER SUB-ASSEMBLY


    B107583E01
  1. Using hog ring pliers, install the No.1 seatback cover sub-assembly with 2 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



4. INSTALL NO.1 SEATBACK COVER SUB-ASSEMBLY WITH PAD


5. INSTALL REAR SEAT HEADREST SUPPORT


6. INSTALL REAR SEAT HEADREST SUPPORT


7. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY (w/ Assist Grip)


8. INSTALL ASSIST GRIP (w/ Assist Grip)


9. INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 RH


10. INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 LH


11. INSTALL REAR SEAT HEADREST ASSEMBLY


12. INSTALL NO.1 SEAT LEG SUB-ASSEMBLY


    B107574
  1. Install the No.1 seat leg sub-assembly with the 4 bolts.

    Torque:
    41 N*m{ 418 kgf*cm , 30 ft.*lbf }



13. INSTALL NO.1 SEAT CUSHION PAD


14. INSTALL NO.1 SEAT CUSHION COVER SUB-ASSEMBLY


    B107584E01
  1. Using hog ring pliers, install the No.1 seat cushion cover sub-assembly with 8 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



15. INSTALL NO.1 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD


16. INSTALL SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Lap Type Belt Assembly No.1)


    B107680
  1. Install the seat lap type belt assembly No.1 with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



17. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)


    B107679
  1. Install the rear seat belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



18. INSTALL REAR SEAT LEG SIDE COVER NO.4 (for Second Row)


19. INSTALL REAR SEAT LEG SIDE COVER NO.5


20. INSTALL RECLINING ADJUSTER COVER RH


21. INSTALL RECLINING ADJUSTER COVER LH


22. INSTALL RECLINING ADJUSTER RELEASE HANDLE NO.1