Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW MASTER SWITCH

POWER WINDOW MASTER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW MASTER SWITCH


    B050518E04
  1. Remove the power window master switch.

  1. Measure the resistance when the switch is operated according to the value(s) in the table below.

    Standard resistance:
    UNLOCK position (Window Lock):
    Tester Connection
    Switch Condition
    Specified Condition
    6 - 13
    1 - 15
    UP
    Below 1 Ω
    1 - 13
    1 - 15
    OFF
    Below 1 Ω
    1 - 13
    6 - 15
    DOWN
    Below 1 Ω
    LOCK position (Window Lock):
    Tester Connection
    Switch Condition
    Specified Condition
    6 - 13
    UP
    Below 1 Ω
    13 - 15
    OFF
    Below 1 Ω
    6 - 15
    DOWN
    Below 1 Ω