Home › BRAKE › BRAKE CONTROL › ANTI-LOCK BRAKE SYSTEM

ANTI-LOCK BRAKE SYSTEM > DIAGNOSIS SYSTEM

for Preparation Click here



DESCRIPTION


    C111154E03
  1. If the ABS system or skid control ECU detects a malfunction, the ABS warning light will come on to warn the driver.



  2. C052361E48
  3. The DTCs are simultaneously stored in memory.
    The DTCs can be read by connecting the SST between terminals TC (13) and CG (4) of the DLC3 and observing the blinking pattern of the ABS warning light, or by connecting an intelligent tester (Click here).

    SST
    09843-18043  


WARNING LIGHT BULB CHECK


    C111155E01
  1. When the ignition switch is turned to the ON position, check that the ABS warning light comes on for approximately 3 seconds.

    HINT:
    If the warning light check result is not normal, proceed to troubleshooting for the ABS warning light circuit.
    If the indicator remains on, proceed to troubleshooting for the light circuit below.

    Trouble Area
    See procedure
    ABS warning light circuit
    Click here