ANTI-LOCK BRAKE SYSTEM > CHECK FOR INTERMITTENT PROBLEMS |
| CHECK FOR INTERMITTENT PROBLEMS |
![]() |
Turn the ignition switch off and connect the intelligent tester to the DLC3.
![]() |
Turn the ignition switch to the ON position. Follow the directions on the intelligent tester to display the DATA LIST and select areas where momentary interruption should be monitored.
| Item (Display) | Measurement Item / Range (Display) | Normal Condition | Diagnostic Note |
| FR Speed Open | Speed sensor open detection (FR) / OPN DET or NORMAL | OPN DET: Momentary interruption NORMAL: Normal | - |
| FL Speed Open | Speed sensor open detection (FL) / OPN DET or NORMAL | OPN DET: Momentary interruption NORMAL: Normal | - |
| RR Speed Open | Speed sensor open detection (RR) / OPN DET or NORMAL | OPN DET: Momentary interruption NORMAL: Normal | - |
| RL Speed Open | Speed sensor open detection (RL) / OPN DET or NORMAL | OPN DET: Momentary interruption NORMAL: Normal | - |
![]() |
While observing the screen, gently jiggle the connector or wire harness between the ECU and sensors, or between ECUs.