ANTI-LOCK BRAKE SYSTEM > FREEZE FRAME DATA |
| FREEZE FRAME DATA |
Whenever a DTC is detected or the ABS operates, the skid control ECU stores the current vehicle (sensor) state as freeze frame data.
The skid control ECU stores the number of times (maximum: 31) the ignition switch has been turned from OFF to the ON position since the last time the ABS was activated.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
On the tester display, select the FREEZE FRAME DATA.
| Intelligent Tester Display | Measurement Item | Reference Value |
| Vehicle Speed | Vehicle speed reading | Min.: 0 mph (0 km/h), Max.: 202 mph (326.4 km/h) |
| Stop Light SW | Stop light switch signal | Stop light switch ON: ON, OFF: OFF |
| Number of IG ON | Number of operations of ignition switch ON after memorizing freeze frame data | 0 to 31 |
| Operated System | System status | ABS activated: ABS No system activated: NO SYS |
| Freeze DTC | Freeze DTC (Trouble code) | - |
| Vehicle Speed Grade | Vehicle speed change | Min: -1.869 G, Max.: 1.869 G |