Home › BODY ELECTRICAL › METER › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



COMBINATION METER ASSEMBLY
*1: w/o ABS
*2: w/ ABS
*3: w/ Tachometer
*4: Driver Side Seat Belt Warning Light
*5: w/ Front Fog light
*6: A/T
*7: w/ Airbag
*8: Diesel

E110619E01


METER GAUGE: 
Item
Detail
Speedometer
Indicates the vehicle speed based on a signal received from the vehicle speed sensor.
Tachometer (*3)
ECM transmits engine speed to the meter display.
Engine Coolant Temperature Receiver Gauge
Indicates the water temperature based on a signal receiving from the ECM.
Fuel Gauge
Receives the fuel signal from the fuel sender gauge.

WARNING/INDICATOR: 
Item
Detail
TURN SIGNAL
Receives the turn signal from the turn signal flasher.
BEAM
Receives the beam signal from the light control switch.
CHARGE
Receives the charge malfunction signal from the ECM.
CHECK E/G
Receives the check engine malfunction signal from the ECM.
DOOR
Open door indicator light comes on when a door condition signal is received from the each door courtesy light switch.
D-BELT (*4)
Receives the driver side seat belt signal from the driver side front seat inner belt assembly.
Fr FOG (*5)
Receives the front fog light signal from the front fog relay.
TAIL
Receives the taillight signal from the combination switch.
FUEL
Receives the fuel signal from the fuel sender gauge.
A/T SHIFT (*6)
Receives the A/T shift condition signal from the park/neutral position switch and shift lock control ECU.
OIL LEVEL
Receives the engine oil level signal from the engine oil level sensor.
OIL
Receives the oil pressure signal from the engine oil pressure switch.
T-BELT
The combination meter assembly determines the indicator operation based on the accumulated ODO data and the T-BELT setting.
SEDIMENT/FILTER
Receives the sedimenter signal /fuel filter signal from the fuel sedimenter switch/fuel filter switch.
ABS (*2)
Receives the ABS signal from the brake actuator assembly.
BRAKE
Receives the brake signal from the brake actuator assembly and brake master cylinder reservoir.
AIRBAG (*7)
Receives the airbag signal from the airbag sensor assembly center.
GLOW (*8)
Receives the glow signal from the ECM.