Home › BODY ELECTRICAL › METER › ENGINE OIL LEVEL SENSOR

ENGINE OIL LEVEL SENSOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT ENGINE OIL LEVEL SENSOR


E111219E01
E111215E01
E109211E01
  1. Remove the engine oil level sensor with the connector still connected.

  1. Measure the resistance when the sensor temperature is between 60°C (140°F) or higher.
    Standard Resistance (Gasoline engine) 
    Tester Connection
    Condition
    Specified Condition
    D11-1 - D11-2
    Float position: top
    Below 1 Ω
    D11-1 - D11-2
    Float position: bottom
    10 kΩ or higher
    Standard Resistance (Diesel engine) 
    Tester Connection
    Condition
    Specified Condition
    D12-1 - D12-2
    Float position: top
    Below 1 Ω
    D12-1 - D12-2
    Float position: bottom
    10 kΩ or higher

    HINT:
    If the value is not as specified, replace the engine oil level sensor.