Home › BODY ELECTRICAL › LIGHTING › LIGHTING SYSTEM

LIGHTING SYSTEM > PRECAUTION

for Preparation Click here



1.GENERAL PRECAUTION
  1. While using the battery during inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.


2.PRECAUTION FOR DISCONNECTING THE BATTERY CABLE

NOTICE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable reconnected.


System Name
See procedure
Power Window Control System
Click here

3.PRECAUTION OF HEADLIGHT BULB REPLACEMENT
  1. If even a thin film of oil is left on the surface of the halogen light, its service life will be shortened because the light will burn at a higher temperature.

  2. Handle any halogen light with great care. Dropping, hitting or damaging the bulb, in any way, may result in it exploding and shattering because the internal pressure is high.

  3. Always prepare a new bulb for immediate replacement. While replacing the bulb, the lens may attract dust and moisture if removed from the vehicle for too long.

  4. Always use a bulb of the same wattage for replacement.

  5. Firmly reinstall the socket after bulb replacement. The lens may become cloudy or the light cavity may fill with water through the gaps around the socket.