FORWARD CLUTCH > REASSEMBLY |
| 1. INSTALL INPUT SHAFT OIL SEAL RING |
![]() |
Coat the 3 oil seal rings with ATF.
Squeeze the ends of the 3 oil seal rings together, and then install them to the forward clutch drum groove.
| 2. INSTALL FORWARD CLUTCH PISTON O-RING |
![]() |
Coat 2 new O-rings with ATF, and install them on the forward clutch piston.
| 3. INSTALL FRONT CLUTCH PISTON SUB-ASSEMBLY |
![]() |
Coat a new O-ring with ATF, and install it on the forward clutch drum.
![]() |
Be careful not to damage the O-rings, and press the clutch piston into the forward clutch drum with both hands.
| 4. REMOVE FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY |
![]() |
Install the piston return spring.
![]() |
Place SST on the spring retainer, and compress the return spring with a press.
| 5. REMOVE FORWARD MULTIPLE DISC CLUTCH CLUTCH DISC |
![]() |
Install the cushion plate.
![]() |
Install the 5 plates and 5 discs.
Then install the flange with the flat end facing downward.
![]() |
Install the snap ring with a screwdriver.
| 6. INSPECT AND ADJUST PISTON STROKE OF FORWARD CLUTCH |
![]() |
Using SST and a dial indicator, measure the forward clutch piston stroke while applying and releasing compressed air (392 kPa, 4.0 kgf/cm2, 57 psi).
| No. | Thickness | No. | Thickness |
| 90 | 3.0 (0.118) | 94 | 3.8 (0.150) |
| 91 | 3.2 (0.126) | 95 | 4.0 (0.157) |
| 92 | 3.4 (0.134) | 96 | 4.2 (0.165) |
| 93 | 3.6 (0.142) | 97 | 4.4 (0.173) |