Home › TRANSMISSION ยท A340E AUTOMATIC TRANSMISSION › SECOND BRAKE

SECOND BRAKE > INSPECTION

for Preparation Click here



1. INSPECT SECOND BRAKE PISTON


    AT08439
  1. Make sure the 2nd brake piston moves smoothly when applying and releasing low-pressure compressed air to the 2nd brake drum.



2. INSPECT DIRECT MULTIPLE DISC CLUTCH


    AT06455E02
  1. Check to see if the sliding surfaces of the disc, the plate and the flange are worn or burnt. If necessary, replace them.

    HINT:
    1. If the lining of the disc is peeled off or discolored, or even if only a part of the printed numbers is corroded, replace all discs.
    2. Before assembling new discs, soak them in ATF for at least 15 minutes.



3. INSPECT SECOND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY


    D029781
  1. Using vernier calipers, measure the free length of the spring together with the spring seat.

    Standard free length:
    16.05 mm (0.6319 in.)