SECOND COAST BRAKE > DISASSEMBLY |
| 1. REMOVE 2ND COAST BRAKE PISTON OIL SEAL RING |
![]() |
Remove the oil seal ring from the piston.
| 2. REMOVE 2ND COAST BRAKE PISTON ROD |
![]() |
Firmly hold down the piston, then compress the compression spring.
Using needle nose-pliers, remove the E-ring.
![]() |
Remove the compression spring, the retainer and the piston rod.
| 3. INSPECT 2ND COAST BRAKE BAND ASSEMBLY |
![]() |
If the lining of the brake band is peeled off or discolored, or even only a part of the printed numbers is corroded, replace the brake band.