Home › TRANSMISSION ยท A343E AUTOMATIC TRANSMISSION › DIRECT CLUTCH

DIRECT CLUTCH > INSPECTION

for Preparation Click here



1. INSPECT PISTON STROKE OF DIRECT CLUTCH


    AT08250
  1. Place the direct clutch assembly onto the O/D support assembly.



    AT08166E01
  1. Using SST and a dial indicator, measure the direct clutch piston stroke while applying and releasing compressed air (392 to 785 kPa, 4.0 to 8.0 kgf/cm2, 57 to 114 psi).

    SST
    09350-30020   (09350-06120)

    Piston stroke:
    1.37 to 1.60 mm (0.0539 to 0.0630 in.)

    If the piston stroke is less than the limit, parts may have been assembled incorrectly, so check and reassemble again.
    If the piston stroke is outside the standard, select another flange.

    HINT:
    There are 8 different thicknesses for the flange.

    Flange thickness: 
    No.
    Thickness
    No.
    Thickness
    53
    3.3 (0.130)
    57
    3.7 (0.146)
    54
    3.4 (0.134)
    58
    3.8 (0.150)
    55
    3.5 (0.138)
    60
    4.0 (0.157)
    56
    3.6 (0.142)
    62
    4.2 (0.165)



2. INSPECT DIRECT CLUTCH FLANGE


    AT06454E01
  1. Check if the sliding surfaces of the disc, the plate and the flange are worn or burnt. If necessary, replace them.

    HINT:
    If the lining of the disc is peeled off or discolored, or even if only a part of the printed numbers is corroded, replace all discs.



3. INSPECT DIRECT CLUTCH RETURN SPRING SUB-ASSEMBLY


    D001246
  1. Measure the free length of the spring together with the spring seat.

    Standard free length:
    21.32 mm (0.8394 in.)



4. INSPECT DIRECT CLUTCH PISTON SUB-ASSEMBLY


    AT08435
  1. Check that the check ball is free by shaking the piston.

  1. Check that the valve does not have leaks by applying low-pressure compressed air.



5. INSPECT DIRECT CLUTCH DRUM SUB-ASSEMBLY


    AT08156
  1. Using a dial indicator, measure the inside diameter of the clutch drum bushing.

    Maximum inside diameter:
    53.99 mm (2.1256 in.)

    If the inside diameter is greater than the maximum, replace the clutch drum.