Home › TRANSMISSION ยท A343E AUTOMATIC TRANSMISSION › REAR PLANETARY GEAR

REAR PLANETARY GEAR > INSPECTION

for Preparation Click here



1. INSPECT 1 WAY CLUTCH NO.2


    AT08200E01
  1. Hold the planetary gear and turn the one-way clutch inner race. Check that the one-way clutch inner race can be turned freely counterclockwise and locked clockwise.



2. INSPECT PLANETARY PINION GEAR THRUST CLEARANCE


    AT04459
  1. Using a feeler gauge, measure the planetary pinion gear thrust clearance.

    Standard clearance:
    0.20 to 0.60 mm (0.0079 to 0.0236 in.)

    Maximum clearance:
    0.65 mm (0.0256 in.)

    If the clearance is greater than the maximum, replace the planetary gear assembly.