REAR PLANETARY GEAR > DISASSEMBLY |
| 1. REMOVE REAR PLANETARY GEAR ASSEMBLY |
![]() |
Remove the output shaft from the rear planetary gear.
| 2. REMOVE PLANETARY OUTPUT SHAFT OIL SEAL RING |
![]() |
Remove the oil seal ring from the output shaft.
| 3. REMOVE REAR PLANETARY RING GEAR |
![]() |
Remove the rear planetary gear from the rear planetary ring gear.
| 4. INSPECT 1 WAY CLUTCH NO.2 |
![]() |
Hold the planetary gear and turn the one-way clutch inner race. Check that the one-way clutch inner race can be turned freely counterclockwise and locked clockwise.
| 5. REMOVE 1 WAY CLUTCH NO.2 |
![]() |
Remove the one-way clutch inner race from the rear planetary gear.
![]() |
Using a screwdriver, remove the snap ring.
![]() |
Remove the No.2 one-way clutch with the retainers from the rear planetary gear.
| 6. REMOVE PLANETARY CARRIER THRUST WASHER NO.2 |
![]() |
Remove the thrust washer No.2 from the rear planetary gear.
| 7. REMOVE PLANETARY CARRIER THRUST WASHER NO.1 |
![]() |
Remove the thrust washer No.1 from the rear planetary gear.
| 8. REMOVE REAR PLANETARY FLANGE THRUST NEEDLE ROLLER BEARING |
![]() |
Remove the 2 races and the bearing from the rear planetary ring gear.
| 9. REMOVE REAR PLANETARY RING GEAR FLANGE |
![]() |
Using a screwdriver, remove the snap ring.
![]() |
Remove the ring gear flange.
| 10. INSPECT PLANETARY PINION GEAR THRUST CLEARANCE |
![]() |
Using a feeler gauge, measure the planetary pinion gear thrust clearance.