Home › ENGINE ยท 5L-E › ENGINE CONTROL SYSTEM › ECD SYSTEM

DTC    17    Interior IC Malfunction

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
17
ECU malfunction
  1. ECM

INSPECTION PROCEDURE

HINT:
Read freeze frame data using intelligent tester. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was running or stopped, whether the engine was warmed up or not, whether the air/fuel ratio was lean or rich, as well as other data recorded at the time of a malfunction.

1.READ OUTPUT DTC (INTERIOR IC DTC IS OUTPUT AGAIN)
  1. Clear the DTC (Click here).

  1. Turn the ignition switch ON.

  1. Check the DTC (Click here).

    Result:

    Display (DTC output)
    Proceed to
    DTC 17 is output again
    A
    No DTC output
    B



B
CHECK FOR INTERMITTENT PROBLEMS
A

REPLACE ECM