Home › ENGINE ยท 2KD-FTV › ENGINE CONTROL SYSTEM › DIESEL THROTTLE BODY

DIESEL THROTTLE BODY > REMOVAL

for Preparation Click here



1. REMOVE ENGINE UNDER COVER NO.1 (w/ Engine Under Cover No.1)
  1. Remove the 7 bolts and engine under cover No.1.



2. SEPARATE VANE PUMP OIL RESERVOIR ASSEMBLY


    A102278
  1. Remove the 2 bolts. Separate the vane pump oil reservoir assembly.



3. DISCONNECT OIL RETURN HOSE (w/ Intercooler)


    A106042
  1. Loosen the clip.

  1. Disconnect the oil return hose from the intake manifold.



4. REMOVE EGR PIPE SUB-ASSEMBLY NO.1 (w/ EGR Valve)


    A106043
  1. Disconnect the fuel pressure sensor connector.



    A106844
  1. Remove the 2 bolts, 2 nuts, and the EGR pipe sub-assembly.

  1. Remove the 2 gaskets.



5. REMOVE AIR HOSE NO.4


    A102281
  1. Loosen the 2 clamps.

  1. Remove the air hose No.4.



6. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    A102282
  1. Disconnect the 2 throttle body connectors.



    A102902
  1. Remove the 2 bolts, 2 nuts, and the diesel throttle body assembly.

  1. Remove the gasket from intake air connector.