FUEL SYSTEM > ON-VEHICLE INSPECTION |
| 1. CHECK FOR FUEL LEAKS |
Check that there are no fuel leaks anywhere on the fuel system after doing maintenance.
| 2. CHECK INJECTION OR SUPPLY PUMP ASSEMBLY |
Inspect the engine speed sensor.
![]() |
Using an ohmmeter, measure the resistance between the terminals.
Inspect the spill control valve.
![]() |
Using an ohmmeter, measure the resistance between the terminals.
Inspect the timing control valve.
![]() |
Using an ohmmeter, measure the resistance between the terminals.
Inspect the timing control valve solenoid operation.
Connect the battery positive terminal to the timing control valve terminal +B.
Connect the battery negative terminal to the timing control valve terminal TCV.
Check that the solenoid makes a 'click' sound.