Home › ENGINE ยท 2TR-FE › ENGINE CONTROL SYSTEM › CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE FAN AND GENERATOR V BELT
(Click here)


2. SEPARATE VANE PUMP ASSEMBLY


    C101368E01
  1. Disconnect the oil pressure switch connector.



    C101369
  1. Remove the 2 bolts, and separate the vane pump assembly.



3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (OCV)


    A110724
  1. Disconnect the camshaft timing oil control valve connector.



    A110723
  1. Remove the bolt and the camshaft timing oil control valve assembly.