Home › ENGINE ยท 2TR-FE › ENGINE CONTROL SYSTEM › MASS AIR FLOW METER

MASS AIR FLOW METER > REMOVAL

for Preparation Click here



1. REMOVE RADIATOR GRILLE


    B101611E01
  1. Remove the 2 clips and 2 screws.

  1. Release the 6 claws and 4 clips and remove the radiator grille.



2. REMOVE STEP PLATE COVER LH


    B101612E01
  1. Remove the 4 clips.

  1. Release the claw and remove the step plate cover.



3. REMOVE STEP PLATE COVER RH


4. REMOVE FRONT BUMPER COVER


    E109046E01
  1. Remove the 8 clips and 3 bolts.

  1. Release the 12 claws and remove the bumper.

  1. Disconnect the connectors. (w/ fog light)



5. REMOVE AIR CLEANER INLET SUB-ASSEMBLY


    A106857
  1. Remove the 2 bolts.

  1. Loosen the clip, and remove the air cleaner inlet sub-assembly.



6. REMOVE INTAKE AIR FLOW METER SUB-ASSEMBLY


    A110722
  1. Disconnect the mass air flow meter connector.

  1. Remove the 2 screws and the mass air flow meter.