Home › ENGINE ยท 2TR-FE › ENGINE CONTROL SYSTEM › ECM

ECM > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT DOOR SCUFF PLATE RH


3. REMOVE FRONT SEAT ASSEMBLY RH (for Hi-back Seat Type)

HINT:
Use the same procedures described for the LH side.



4. REMOVE FRONT SEAT ASSEMBLY RH (for Low-back Seat Type)

HINT:
Use the same procedures described for the LH side.



5. REMOVE ECM
  1. Separate the floor carpet.



    A113044E01
  1. Separate the 2 clips and clamp.

  1. Disconnect the 4 ECM connectors.

  1. Remove the ECM w/ cover.



    A113046E01
  1. Remove the 4 bolts and the ECM cover.