Home › BODY › SEAT › REAR NO. 4 SEAT ASSEMBLY

REAR NO. 4 SEAT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL NO.4 SEATBACK SPRING ASSEMBLY


2. INSTALL REAR SEAT 3-POINT TYPE BELT ASSEMBLY (w/ Rear Seat 3-Point Type Belt Assembly)


    B105634
  1. Install the rear seat 3 point type belt assembly with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Install the 3 screws.



3. INSTALL REAR SEAT SHOULDER BELT HOLE COVER (w/ Rear Seat 3-Point Type Belt Assembly)


4. INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 (w/ Rear Seat 3-Point Type Belt Assembly)


5. INSTALL NO.4 SEAT FRONT BRACKET COVER


6. INSTALL NO.4 SEATBACK HEADREST PAD


7. INSTALL NO.4 SEATBACK COVER SUB-ASSEMBLY (w/o Headrest)


    B107644E01
  1. Using hog ring pliers, install the No.4 seatback cover sub-assembly with 4 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



    B107640
  1. Engage the hook of the No.4 seatback cover sub-assembly.

  1. Close the fastener of the No.4 seatback cover sub-assembly.



8. INSTALL NO.4 SEATBACK COVER SUB-ASSEMBLY (w/ Headrest)


    B107644E01
  1. Using hog ring pliers, install the No.4 seatback cover sub-assembly with 4 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



9. INSTALL REAR SEATBACK LOCK BEZEL LOWER (w/ Rear Seat 3-Point Type Belt Assembly)


10. INSTALL REAR SEATBACK LOCK BEZEL UPPER (w/ Rear Seat 3-Point Type Belt Assembly)


11. INSTALL REAR SEAT HEADREST SUPPORT (w/ Headrest)


12. INSTALL REAR SEAT HEADREST SUPPORT (w/ Headrest)


13. INSTALL REAR SEAT CUSHION


14. INSTALL REAR SEAT HEADREST ASSEMBLY (w/ Headrest)


15. INSTALL REAR SEAT CUSHION SPRING ASSEMBLY


16. INSTALL REAR SEAT CUSHION SPACER


17. INSTALL REAR SEAT LOCK HANDLE KNOB


18. INSTALL REAR SEAT CUSHION SPACER


19. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)


    B107687
  1. Install the rear seat belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



20. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)


    B107686
  1. Install the rear seat belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



21. INSTALL REAR SEAT CUSHION UNDER COVER


22. INSTALL REAR SEAT CUSHION LOCK HOOK SUB-ASSEMBLY


23. INSTALL REAR SEAT CUSHION LEG HINGE


    B107634
  1. Install the rear seat cushion leg hinge with the bolt and spacer.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }



24. INSTALL NO.4 SEAT CUSHION PAD


25. INSTALL NO.4 SEAT CUSHION COVER SUB-ASSEMBLY


    B107646E01
  1. Using hog ring pliers, install the No.4 seat cushion cover sub-assembly with 12 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



    B107647E01
  1. Using hog ring pliers, install the 4 new hog rings.

    NOTICE:
    Be careful not to damage the cover.



26. INSTALL NO.4 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD


    B107631
  1. Install the No.4 seat cushion cover sub-assembly with pad with the hook and 2 clips.



    B107630
  1. Install the No.4 seat cushion assembly with the 4 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



27. CONNECT REAR SEAT 3-POINT TYPE BELT ASSEMBLY (w/ Rear Seat 3-Point Type Belt Assembly)
  1. Connect the rear seat 3-point type belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



28. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY (w/ Rear SEat Lap Type Belt Assembly)


    B107685
  1. Install the rear seat belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



29. INSTALL LAP BELT OUTER ANCHOR COVER (w/ Seat Belt)


30. INSTALL SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Lap Type Belt Assembly No.1)


    B107682
  1. Install the seat lap type belt assembly No.1 with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



31. INSTALL RECLINING ADJUSTER COVER RH


32. INSTALL RECLINING ADJUSTER COVER LH


33. INSTALL RECLINING ADJUSTER RELEASE HANDLE


34. INSTALL NO.4 SEAT LEG BRACKET REAR


    B107626
  1. Install the No.4 seat leg bracket rear with the bolt and spacer.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }