Home › BODY › SEAT › REAR NO. 3 SEAT ASSEMBLY (w/ Headrest)

REAR NO. 3 SEAT ASSEMBLY (w/ Headrest) > DISASSEMBLY

for Preparation Click here



1. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.3 RH


    B107604
  1. Using a screwdriver, disengage the claw and remove the reclining adjuster release handle No.3 RH.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.3 LH

HINT:
Use the same procedures for the RH side and LH side.



3. REMOVE RECLINING ADJUSTER RELEASE HANDLE
  1. Remove the screw and reclining adjuster release handle.



4. REMOVE RECLINING ADJUSTER COVER RH


    B107605
  1. Disengage the 3 claws and remove the 2 screws and reclining adjuster cover RH.

    HINT:
    Tape the screwdriver tip before use.



5. REMOVE RECLINING ADJUSTER COVER LH

HINT:
Use the same procedures for the RH side and LH side.



6. REMOVE REAR SEAT LEG SIDE COVER NO.4


    B107606
  1. Remove the rear seat leg side cover No.4.



7. REMOVE REAR SEAT LEG SIDE COVER NO.5


    B107607
  1. Remove the rear seat leg side cover No.5.



8. REMOVE REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)

HINT:
Follow the same procedure as for the rear No.2 seat assembly.



9. REMOVE SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Lap Type Belt Assembly No.1)

HINT:
Follow the same procedure as for the rear No.2 seat assembly.



10. REMOVE NO.3 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD


    B105607
  1. Disengage the hooks and remove the No.3 seat cushion cover sub-assembly with pad.



11. REMOVE NO.3 SEAT CUSHION COVER SUB-ASSEMBLY


  1. Remove the 7 hog rings.


    B105608E01



  1. Remove the 24 hog rings and No.3 seat cushion cover sub-assembly.


    B105609E01



12. REMOVE NO.3 SEAT CUSHION PAD


13. REMOVE REAR SEAT 3-POINT TYPE BELT ASSEMBLY (w/ Rear Seat 3-Point Type Belt Assembly)


    B105630
  1. Remove the 8 screws.

  1. Remove the 4 bolts and 2 rear seat 3 point type belt assemblies.



14. REMOVE NO.3 SEAT LEG SUB-ASSEMBLY


    B105611
  1. w/o Seat belt:

    1. Remove the 12 bolts and No.3 seat leg sub-assembly.

  1. w/ Rear seat lap type belt assembly:

    1. Remove the 12 bolts and No.3 seat leg sub-assembly.



    B105610
  1. w/ Rear seat 3-point type belt assembly:

    1. Remove the 10 bolts and No.3 seat leg sub-assembly.



15. REMOVE REAR SEAT LAP TYPE BELT ASSEMBLY (w/ Rear Seat Lap Type Belt Assembly)


16. REMOVE REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)


17. REMOVE REAR SEAT HEADREST ASSEMBLY


18. REMOVE REAR SEAT CUSHION SHIELD INNER NO.1 RH


    B107612
  1. Remove the screw and rear seat cushion shield inner No.1 RH.



19. REMOVE REAR SEAT CUSHION SHIELD INNER NO.1 LH

HINT:
Use the same procedures for the RH side and LH side.



20. REMOVE REAR SEATBACK SHIELD LH


    B107613
  1. Disengage the claw and remove the screw and rear seatback shield LH.



21. REMOVE REAR SEATBACK SHIELD RH

HINT:
Use the same procedures for the RH side and LH side.



22. REMOVE ASSIST GRIP


    B107614
  1. Disengage the 6 claws and 2 assist grip covers.

    HINT:
    Use the same procedures for the RH side and LH side.



    B107615
  1. Remove the 2 screws and assist grip.

    HINT:
    Use the same procedures for the RH side and LH side.



23. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY


    B107616
  1. Disengage the 2 claws and remove the rear seatback board sub-assembly.

    HINT:
    Use the same procedures for the RH side and LH side.



24. REMOVE REAR SEAT HEADREST SUPPORT


    B107617
  1. Open the fastener of the No.3 seatback cover sub-assembly.

    HINT:
    Use the same procedures for the RH side and LH side.



    B107618
  1. Disengage the 2 claws and remove the rear seat headrest support.

    HINT:
    Use the same procedures for the RH side and LH side.



25. REMOVE REAR SEAT HEADREST SUPPORT

HINT:
Use the same procedures for the RH side and LH side.



26. REMOVE NO.3 SEATBACK COVER SUB-ASSEMBLY WITH PAD


    B107619
  1. Remove the No.3 seatback cover sub-assembly with pad from the No.3 seatback spring assembly.

    HINT:
    Use the same procedures for the RH side and LH side.



27. REMOVE NO.3 SEATBACK COVER SUB-ASSEMBLY


    B107620E01
  1. Remove the 2 hog rings and No.3 seatback cover sub-assembly.

    HINT:
    Use the same procedures for the RH side and LH side.



28. REMOVE NO.3 SEATBACK PAD


29. REMOVE NO.3 SEATBACK SPRING ASSEMBLY RH


30. REMOVE NO.3 SEATBACK SPRING ASSEMBLY


31. REMOVE NO.3 SEATBACK SPRING ASSEMBLY LH