Home › BODY › SEAT › REAR NO. 3 SEAT ASSEMBLY (w/ Headrest)

REAR NO. 3 SEAT ASSEMBLY (w/ Headrest) > REASSEMBLY

for Preparation Click here



1. INSTALL NO.3 SEATBACK SPRING ASSEMBLY LH


2. INSTALL NO.3 SEATBACK SPRING ASSEMBLY


3. INSTALL NO.3 SEATBACK SPRING ASSEMBLY RH


4. INSTALL NO.3 SEATBACK PAD


5. INSTALL NO.3 SEATBACK COVER SUB-ASSEMBLY


    B107621E01
  1. Using hog ring pliers, install the No.3 seatback cover sub-assembly with 2 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

    HINT:
    Use the same procedures for the RH side and LH side.



6. INSTALL NO.3 SEATBACK COVER SUB-ASSEMBLY WITH PAD


7. INSTALL REAR SEAT HEADREST SUPPORT


8. INSTALL REAR SEAT HEADREST SUPPORT


9. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY


10. INSTALL ASSIST GRIP


11. INSTALL REAR SEAT BACK SHIELD RH


12. INSTALL REAR SEAT BACK SHIELD LH


13. INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 LH


14. INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 RH


15. INSTALL REAR SEAT HEADREST ASSEMBLY


16. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)


17. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY (w/ Rear Seat Lap Type Belt Assembly)


18. INSTALL NO.3 SEAT LEG SUB-ASSEMBLY


    B105611
  1. w/o Seat belt:

    1. Install the No.3 seat leg sub-assembly with the 12 bolts.

      Torque:
      41 N*m{ 418 kgf*cm , 30 ft.*lbf }

  1. w/ Rear seat lap type belt assembly:

    1. Install the No.3 seat leg sub-assembly with the 12 bolts.

      Torque:
      41 N*m{ 418 kgf*cm , 30 ft.*lbf }



    B105610
  1. w/ Rear seat 3-point type belt assembly:

    1. Install the No.3 seat leg sub-assembly with the 10 bolts.

      Torque:
      41 N*m{ 418 kgf*cm , 30 ft.*lbf }



19. INSTALL REAR SEAT 3-POINT TYPE BELT ASSEMBLY (w/ Rear Seat 3-Point Type Belt Assembly)


    B105630
  1. Install the 2 rear seat 3 point type belt assemblies with the 4 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Install the 8 screws.



20. INSTALL NO.3 SEAT CUSHION PAD


21. INSTALL NO.3 SEAT CUSHION COVER SUB-ASSEMBLY
  1. Using hog ring pliers, install the No.3 seat cushion cover sub-assembly with 24 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.

    2. When installing the hog rings, take care to minimize wrinkles as much as possible.


      B113364E01



  1. Using hog ring pliers, install the 7 new hog rings.

    NOTICE:
    Be careful not to damage the cover.



    B113365E01



22. INSTALL NO.3 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD


23. INSTALL SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Lap Type Belt Assembly NO.1)

HINT:
Follow the same procedure as for the rear No.2 seat assembly.



24. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)

HINT:
Follow the same procedure as for the rear No.2 seat assembly.



25. INSTALL REAR SEAT LEG SIDE COVER NO.5


26. INSTALL REAR SEAT LEG SIDE COVER NO.4


27. INSTALL RECLINING ADJUSTER COVER LH


28. INSTALL RECLINING ADJUSTER COVER RH


29. INSTALL RECLINING ADJUSTER RELEASE HANDLE


30. INSTALL RECLINING ADJUSTER RELEASE HANDLE NO.3 LH


31. INSTALL RECLINING ADJUSTER RELEASE HANDLE NO.3 RH