Home › RESTRAINTS › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY (for Separate Seat Type)
for Hi-back seat type
for Low-back seat type


2. REMOVE FRONT SEAT CUSHION SHIELD INNER LH (for Separate Seat Type)
for Hi-back seat type
for Low-back seat type


3. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Separate Seat Type)


    B107656
  1. for Driver side:

    1. Disengage the 3 clamps.



    B107657
  1. for Passenger side:

    1. Disconnect the connector.

    2. Disengage the 5 clamps.



    B107658
  1. Remove the bolt and front seat inner belt assembly.



4. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Split Bench Seat Type)


    B101687
  1. w/o Seat belt warning occupant detection sensor:

    1. Remove the 2 bolts and separate type front seat cushion cover with pad.



    B103882
  1. w/ Seat belt warning occupant detection sensor:

    1. Remove the 2 bolts.

    2. Disconnect the connector and remove the separate type front seat cushion cover with pad.



5. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Split Bench Seat Type)


    B101656
  1. w/ Seat belt warning:

    1. Disconnect the connector.

  1. Remove the bolt and front seat inner belt assembly.