FRONT SEAT OUTER BELT ASSEMBLY > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT DOOR SCUFF PLATE LH |
| 3. REMOVE FRONT DOOR OPENING TRIM LH |
| 4. REMOVE SEPARATOR BAR BRACKET LOWER (for Semi-trim LH Side) |
![]() |
Remove the screw and separator bar bracket lower.
| 5. REMOVE CENTER PILLAR GARNISH COVER LOWER LH |
| 6. REMOVE SEAT ASSEMBLY LH |
| 7. REMOVE SEAT BELT ANCHOR COVER (for LH Side) |
![]() |
Disengage the claw and remove the 2 clips and seat belt anchor cover.
| 8. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH |
![]() |
Remove the bolt and disconnect the floor side of the front seat outer belt assembly LH.
| 9. REMOVE CENTER PILLAR GARNISH LOWER LH (for Semi-trim) |
![]() |
Using a screwdriver, disengage the 4 clips and remove the center pillar garnish lower LH.
| 10. REMOVE REAR NO.2 SEAT ASSEMBLY (for Full-trim LH Side) |
![]() |
Remove the 4 bolts, 2 nuts and rear No.2 seat assembly.
| 11. REMOVE REAR NO.3 SEAT ASSEMBLY (for Full-trim LH Side) |
![]() |
Remove the 6 bolts, 2 nuts and rear No.3 seat assembly.
| 12. REMOVE REAR NO.4 SEAT ASSEMBLY (for Full-trim LH Side) |
![]() |
Remove the 3 bolts and 2 nuts.
Pull the lever in the direction indicated by the arrow in the illustration, release the 2 locks, and remove the rear No.4 seat assembly.
| 13. REMOVE BACK DOOR SCUFF PLATE (for Full-trim LH Side) |
![]() |
Using a screwdriver, disengage the 7 clips and 4 claws and remove the back door scuff plate.
| 14. REMOVE BACK DOOR WEATHERSTRIP (for Full-trim LH Side) |
| 15. REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH (for Full-trim) |
| 16. REMOVE SIDE NO.1 TRIM ASSEMBLY LH (for Full-trim) |
![]() |
Using a screwdriver, disengage the 21 clips and remove the side No.1 trim assembly LH.
| 17. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH |
![]() |
Using a screwdriver, disengage the 2 claws and disconnect the shoulder side cover of the front seat outer belt assembly LH.
![]() |
Remove the bolt and disconnect the shoulder side of the front seat outer belt assembly LH.
![]() |
w/o Pretensioner:
Remove the bolt and front seat outer belt assembly LH.
![]() |
w/ Pretensioner:
Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector.
![]() |
Remove the 2 bolts and front seat outer belt assembly LH.
| 18. REMOVE FRONT DOOR SCUFF PLATE RH |
| 19. REMOVE FRONT DOOR OPENING TRIM RH |
| 20. REMOVE REAR DOOR SCUFF PLATE RH (for Full-trim) |
![]() |
Using a screwdriver, disengage the 11 clips and remove the rear door scuff plate LH.
| 21. REMOVE SLIDE DOOR WEATHERSTRIP NO.1 RH |
| 22. REMOVE SEPARATOR BAR BRACKET LOWER (for Semi-trim RH Side) |
![]() |
Remove the screw and separator bar bracket lower.
| 23. REMOVE ASSIST GRIP PLUG (for Full-trim RH Side) |
![]() |
Using a screwdriver, disengage the assist grip plugs.
| 24. REMOVE ASSIST GRIP ASSEMBLY REAR (for Full-trim RH Side) |
![]() |
Remove the 2 screws and assist grip assembly rear.
| 25. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH |
![]() |
Remove the bolt and disconnect the floor side of the front seat outer belt assembly RH.
| 26. REMOVE CENTER PILLAR GARNISH LOWER RH |
| 27. REMOVE FRONT SEAT OUTER BELT ASSEMBLY RH |
![]() |
Using a screwdriver, disengage the 2 claws and disconnect the shoulder side cover of the front seat outer belt assembly RH.
![]() |
Remove the bolt and disconnect the shoulder side of the front seat outer belt assembly RH.
![]() |
w/o Pretensioner:
Remove the bolt and front seat outer belt assembly RH.
![]() |
w/ Pretensioner:
Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector.
![]() |
Remove the 2 bolts and front seat outer belt assembly RH.