REAR SEAT OUTER BELT ASSEMBLY > REMOVAL |
| 1. REMOVE REAR NO.1 SEAT ASSEMBLY |
| 2. REMOVE REAR NO.2 SEAT ASSEMBLY |
| 3. REMOVE REAR NO.3 SEAT ASSEMBLY |
| 4. REMOVE REAR NO.4 SEAT ASSEMBLY |
![]() |
Remove the 3 bolts and 2 nuts.
Pull the lever in the direction indicated by the arrow in the illustration, release the 2 locks, and remove the rear No.4 seat assembly.
| 5. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.1 (for Swiveling Seat Type) |
Using a screwdriver, disengage the claw and remove the reclining adjuster release handle No.1.
| 6. REMOVE RECLINING ADJUSTER COVER LH (for Swiveling Seat Type) |
Disengage the 2 claws and remove the screw and reclining adjuster cover LH.
| 7. REMOVE RECLINING ADJUSTER COVER RH (for Swiveling Seat Type) |
Disengage the 2 claws and remove the screw and reclining adjuster cover RH.
| 8. REMOVE SEAT TRACK ADJUSTING HANDLE KNOB (for Swiveling Seat Type) |
Remove the screw and seat track adjusting handle knob.
| 9. REMOVE REAR SEAT TURNTABLE COVER (for Swiveling Seat Type) |
Remove the 6 screws and 2 rear seat turntable covers.
| 10. REMOVE REAR SEAT BELT ASSEMBLY OUTER (for Swiveling Seat Type) |
Remove the bolt and rear seat belt assembly outer.
| 11. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.2 RH (for Rear No.2 Seat Assembly) |
![]() |
Using a screwdriver, disengage the claw and remove the reclining adjuster release handle No.2 RH.
| 12. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.3 RH (for Rear No.3 Seat Assembly) |
![]() |
Using a screwdriver, disengage the claw and remove the reclining adjuster release handle No.3 RH.
| 13. REMOVE RECLINING ADJUSTER COVER RH (for Rear No.2 Seat Assembly) |
![]() |
Disengage the 3 claws and remove the 2 screws and reclining adjuster cover RH.
| 14. REMOVE RECLINING ADJUSTER COVER RH (for Rear No.3 Seat Assembly) |
![]() |
Disengage the 3 claws and remove the 2 screws and reclining adjuster cover RH.
| 15. REMOVE REAR SEAT BELT ASSEMBLY INNER (for Rear No.2 Seat Assembly) |
![]() |
Remove the bolt and rear seat belt assembly inner.
| 16. REMOVE REAR SEAT BELT ASSEMBLY INNER (for Rear No.3 Seat Assembly) |
| 17. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.2 LH (for Rear No.2 Seat Assembly) |
| 18. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.3 LH (for Rear No.3 Seat Assembly) |
| 19. REMOVE RECLINING ADJUSTER COVER LH (for Rear No.2 Seat Assembly) |
| 20. REMOVE RECLINING ADJUSTER COVER LH (for Rear No.3 Seat Assembly) |
| 21. REMOVE NO.2 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD (for Rear No.2 Seat Assembly) |
![]() |
Disengage the hooks and remove the No.2 seat cushion cover sub-assembly with pad.
| 22. REMOVE NO.3 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD (for Rear No.3 Seat Assembly) |
![]() |
Disengage the hooks and remove the No.3 seat cushion cover sub-assembly with pad.
| 23. REMOVE REAR SEAT 3-POINT TYPE BELT ASSEMBLY (for Rear No.2 Seat Assembly) |
![]() |
Remove the 4 screws.
Remove the 2 bolts and rear seat 3 point type belt assembly.
| 24. REMOVE REAR SEAT 3-POINT TYPE BELT ASSEMBLY (for Rear No.3 Seat Assembly) |
![]() |
Remove the 8 screws.
Remove the 4 bolts and 2 rear seat 3 point type belt assemblies.
| 25. REMOVE NO.4 SEAT LEG BRACKET REAR (for Rear No.4 Seat Assembly) |
![]() |
Remove the bolt, spacer and No.4 seat leg bracket rear.
| 26. REMOVE RECLINING ADJUSTER RELEASE HANDLE (for Rear No.4 Seat Assembly) |
![]() |
Remove the screw and reclining adjuster release handle.
| 27. REMOVE RECLINING ADJUSTER COVER LH (for Rear No.4 Seat Assembly) |
![]() |
Disengage the claw and remove the 2 screws and reclining adjuster cover LH.
| 28. REMOVE RECLINING ADJUSTER COVER RH (for Rear No.4 Seat Assembly) |
![]() |
Disengage the claw and remove the 2 screws and reclining adjuster cover RH.
| 29. REMOVE LAP BELT OUTER ANCHOR COVER (for Rear No.4 Seat Assembly) |
![]() |
Disengage the 2 claws and remove the lap belt outer anchor cover.
| 30. DISCONNECT REAR SEAT 3-POINT TYPE BELT ASSEMBLY (for Rear No.4 Seat Assembly) |
Remove the bolt and disconnect the rear seat 3-point type belt assembly.
| 31. REMOVE NO.4 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD (for Rear No.4 Seat Assembly) |
![]() |
Remove the 4 bolts and No.4 seat cushion assembly.
![]() |
Disengage the hooks and remove the 2 clips and No.4 seat cushion cover sub-assembly with pad.
| 32. REMOVE REAR SEAT HEADREST ASSEMBLY (for Rear No.4 Seat Assembly) |
| 33. REMOVE REAR SEAT CUSHION (for Rear No.4 Seat Assembly) |
Remove the screw and rear seat cushion.
| 34. REMOVE REAR SEAT HEADREST SUPPORT (for Rear No.4 Seat Assembly) |
![]() |
Open the fastener of the No.4 seatback cover sub-assembly.
Disengage the hook and turn back the No.4 seatback cover sub-assembly.
![]() |
Disengage the 2 claws and remove the 2 rear seat headrest supports.
| 35. REMOVE REAR SEAT HEADREST SUPPORT (for Rear No.4 Seat Assembly) |
| 36. REMOVE REAR SEATBACK LOCK BEZEL UPPER (for Rear No.4 Seat Assembly) |
| 37. REMOVE REAR SEATBACK LOCK BEZEL LOWER (for Rear No.4 Seat Assembly) |
| 38. REMOVE NO.4 SEATBACK COVER SUB-ASSEMBLY WITH PAD (for Rear No.4 Seat Assembly) |
| 39. REMOVE REAR SEAT CUSHION SHIELD INNER NO.1 (for Rear No.4 Seat Assembly) |
![]() |
Remove the 3 screws and rear seat shoulder shield inner No.1.
| 40. REMOVE REAR SEAT SHOULDER BELT HOLE COVER (for Rear No.4 Seat Assembly) |
![]() |
Remove the 2 screws and rear seat shoulder belt hole cover.
| 41. REMOVE REAR SEAT 3-POINT TYPE BELT ASSEMBLY (for Rear No.4 Seat Assembly) |
![]() |
Remove the 3 screws.
Remove the nut and rear 3 point type belt assembly.
| 42. REMOVE REAR SEAT BELT ASSEMBLY OUTER |
![]() |
Remove the bolt and disconnect the floor side of rear seat belt assembly outer.
![]() |
Using a screwdriver, disengage the 4 claws and disconnect the shoulder side cover of the rear seat belt assembly outer.
![]() |
Disconnect the bolt and shoulder side the rear seat belt assembly outer.
![]() |
Disconnect the bolt and remove the rear seat belt assembly outer.
| 43. REMOVE REAR NO.2 SEAT BELT ASSEMBLY OUTER |
![]() |
Remove the bolt and disconnect the floor side of the rear No.2 seat belt assembly outer.
![]() |
Using a screwdriver, disengage the 2 claws and disconnect the shoulder side cover of the rear No.2 seat belt assembly outer.
![]() |
Remove the bolt and disconnect the shoulder side of the rear No.2 seat belt assembly outer.
![]() |
Remove the bolt and remove the rear No.2 seat belt assembly outer.
| 44. REMOVE REAR NO.3 SEAT BELT ASSEMBLY OUTER |
![]() |
Remove the bolt and disconnect the floor side of the rear No.3 seat belt assembly outer.
![]() |
Using a screwdriver, disengage the 4 claws and disconnect the shoulder side cover of the rear No.3 seat belt assembly outer.
![]() |
Disconnect the bolt and shoulder side of the rear No.3 seat belt assembly outer.
![]() |
Using a screwdriver, disengage the 4 claws and disconnect the rear No.3 seat belt assembly outer retractor cover.
![]() |
Remove the bolt and rear No.3 seat belt assembly outer.
| 45. REMOVE REAR NO.4 SEAT BELT ASSEMBLY OUTER |
![]() |
Remove the bolt and disconnect the floor side of the rear No.4 seat belt assembly outer.
![]() |
Using a screwdriver, disengage the shoulder side cover of the 2 claws and disconnect the rear No.4 seat belt assembly outer.
![]() |
Remove the bolt and disconnect the shoulder side of the rear No.4 seat belt assembly outer.
![]() |
Using a screwdriver, disengage the 4 claws and disconnect the rear No.4 seat belt assembly outer retractor cover.
![]() |
Remove the bolt and rear No.4 seat belt assembly outer.