Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › CLEARANCE SONAR SYSTEM

CLEARANCE SONAR SYSTEM > TERMINALS OF ECU



CLEARANCE WARNING ECU

E110853E01


Terminal No. (Symbols)
Wiring color
Terminal description
Condition
Specified condition
H33-1 (S1) - H33-14 (E1)
R - G
Front clearance sonar sensor RH
When signals are transmitted from the ECU to the front clearance sonar sensor RH
Pulse generation
Refer to waveform 3
H33-2 (S4) - H33-15 (E4)
B - W
Front clearance sonar sensor LH
When signals are transmitted from the ECU to the front clearance sonar sensor LH
Pulse generation
Refer to waveform 3
H33-3 (S5) - H33-16 (E5)
B - Y
Rear clearance sonar sensor RH
When signals are transmitted from the ECU to the rear clearance sonar sensor RH
Pulse generation
Refer to waveform 3
H33-4 (S6) - H33-17 (E6)
W - R
Rear clearance sonar sensor LH
When signals are transmitted from the ECU to the rear clearance sonar sensor LH
Pulse generation
Refer to waveform 3
H33-5 (S7) - H33-18 (E7)
P - V
Back sonar sensor RH
When signals are transmitted from the ECU to the back sonar sensor RH
Pulse generation
Refer to waveform 2
H33-6 (S8) - H33-19 (E8)
L - Y
Back sonar sensor LH
When signals are transmitted from the ECU to the back sonar sensor LH
Pulse generation
Refer to waveform 2
H33-8 (IG) - H33-27 (E)
L-R - W-B
Power source
Ignition switch ON, clearance sonar main switch OFF → ON
Below 1 V →
10 to 14 V
H33-9 (RL) - H33-27 (E)
L - W-B
Reverse signal
Ignition switch ON, shift position is except R position → R
Below 1 V →
10 to 14 V
H33-10 (CBZ) - H33-27 (E)
L-W - W-B
Clearance warning buzzer
Clearance sonar sounding (when the clearance sonar senses something)
Pulse generation
Refer to waveform 1
H33-11 (L7) - H33-27 (E)
Y - W-B
Back sonar indicator
Back sonar indicator OFF → ON
10 to 14 V → Below 3 V
H33-12 (L6) - H33-27 (E)
Y-B - W-B
Clearance sonar indicator rear LH
Clearance sonar indicator rear LH OFF → ON
10 to 14 V → Below 3 V
H33-13 (L5) - H33-27 (E)
Y-R - W-B
Clearance sonar indicator rear RH
Clearance sonar indicator rear RH OFF → ON
10 to 14 V → Below 3 V
H33-14 (E1) - H33-27 (E)
G - W-B
Ground (for front clearance sonar sensor RH)
Always
Below 1 V
H33-15 (E4) - H33-27 (E)
W - W-B
Ground (for front clearance sonar sensor LH)
Always
Below 1 V
H33-16 (E5) - H33-27 (E)
Y - W-B
Ground (for rear clearance sonar sensor RH)
Always
Below 1 V
H33-17 (E6) - H33-27 (E)
R - W-B
Ground (for rear clearance sonar sensor LH)
Always
Below 1 V
H33-18 (E7) - H33-27 (E)
V - W-B
Ground (for back sonar sensor RH)
Always
Below 1 V
H33-19 (E8) - H33-27 (E)
Y - W-B
Ground (for back sonar sensor LH)
Always
Below 1 V
H33-25 (SPD) - H33-27 (E)
P-L - W-B
Speed signal
When driving at low speed
Pulse generation
H33-26 (TL) - H33-27 (E)
G - W-B
Dimmer signal
Light control switch off
→ TAIL or HEAD
Below 1 V →
10 to 14 V
H33-27 (E) - Body ground
W-B -
Body ground
Ground
Always
Below 1 V
H33-28 (PL) - H33-27 (E)
R-W - W-B
Parking position signal
Shift lever is P position (A/T)
10 to 14 V
H33-30 (L10) - H33-27 (E)
L - W-B
Power indicator
Ignition switch ON, clearance sonar main switch OFF → ON
10 to 14 V →
Below 3 V
H33-31 (L4) - H33-27 (E)
Y-G - W-B
Front clearance sonar indicator LH
Front clearance sonar indicator LH OFF → ON
10 to 14 V → Below 3 V
H33-32 (L1) - H33-27 (E)
L-B - W-B
Front clearance sonar indicator RH
Front clearance sonar indicator RH OFF → ON
10 to 14 V → Below 3 V

CLEARANCE WARNING INDICATOR

E111306E01


Terminal No. (Symbols)
Wiring color
Terminal description
Condition
Specified condition
H15-1 (E) - Body ground
W-B -
Body ground
Ground
Always
Below 1 V
H15-2 (RR) - H15-1 (E)
Y-R - W-B
Rear clearance sonar indicator RH
Rear clearance sonar indicator RH OFF → ON
10 to 14 V → Below 3 V
H15-3 (FR) - H15-1 (E)
L-B - W-B
Front clearance sonar indicator RH
Front clearance sonar indicator RH OFF → ON
10 to 14 V → Below 3 V
H15-4 (RL) - H15-1 (E)
Y-B - W-B
Rear clearance sonar indicator LH
Rear clearance sonar indicator LH OFF → ON
10 to 14 V → Below 3 V
H15-5 (FL) - H15-1 (E)
Y-G - W-B
Front clearance sonar indicator LH
Front clearance sonar indicator LH OFF → ON
10 to 14 V → Below 3 V
H15-7 (BD) - H15-1 (E)
L-R - W-B
Power source
Always
10 to 14 V
H15-9 (BK) - H15-1 (E)
Y - W-B
Back sonar indicator
Back sonar indicator OFF → ON
10 to 14 V → Below 3 V
H15-10 (OP) - H15-1 (E)
L - W-B
Power indicator
Ignition switch ON, clearance sonar main switch OFF → ON
10 to 14 V → Below 3 V
H15-11 (BZ) - H15-1 (E)
L-W - W-B
Clearance warning buzzer
Clearance sonar sounding (when the clearance sonar senses something)
Pulse generation
Refer to waveform 1
H15-12 (SK) - H15-1 (E)
L-R - W-B
Power source
Ignition switch ON, clearance sonar main switch OFF → ON
Below 1 V →
10 to 14 V


    I041864E01
  1. Reference: waveform 1

    HINT:
    1. Terminal: CBZ - E, BZ - E
    2. Gauge set: 2 V/DIV, 500 μs/DIV
    3. Condition: When the clearance sonar is detecting.



  2. I041867E01
  3. Reference: waveform 2

    HINT:
    1. Terminal: S7 - E7, S8 - E8
    2. Gauge set: 2 V/DIV, 100 μs/DIV
    3. Condition: When the clearance sonar is not detecting.



  4. I041866E01
  5. Reference: waveform 3

    HINT:
    1. Terminal: S1 - E1, S4 - E4, S5 - E5, S6 - E6
    2. Gauge set: 2 V/DIV, 100 μs/DIV
    3. Condition: When the back sonar is not detecting.