Home › ENGINE ยท 5L-E › ENGINE CONTROL SYSTEM › VENTURI

VENTURI > INSTALLATION

for Preparation Click here



1. INSTALL VENTURI ASSEMBLY
  1. Install a new gasket and venturi.



    A111053E01
  1. Connect the throttle control motor connector.



    A111052E01
  1. Connect the throttle open switch connector.



2. INSTALL INTAKE AIR CONNECTOR SUB-ASSEMBLY


    A111051
  1. Install a new gasket and intake air connector with the bolt and 3 nuts.

    Torque:
    bolt:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }
    Nut:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }

  1. Connect the turbo pressure sensor connector.

  1. Connect the ventilation hose.



3. CONNECT AIR CLEANER HOSE NO.2
  1. Install the air cleaner hose No.2 with the clamp.



4. REMOVE CABLE TO NEGATIVE BATTERY TERMINAL


5. PERFORM INITIALIZATION
(Click here)