Home
›
ENGINE ยท 5L-E
›
ENGINE CONTROL SYSTEM
›
ACCELERATOR PEDAL ROD
ACCELERATOR PEDAL ROD > INSTALLATION
for Preparation
Click here
1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY
NOTICE:
Do not give a shock to the accelerator pedal rod assembly.
Do not disassemble the accelerator pedal rod assembly.
Install the accelerator pedal rod assembly with the 2 nuts.
Torque:
5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
Connect the accelerator pedal connector.