Home › ENGINE ยท 2TR-FE › ENGINE CONTROL SYSTEM › CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (OCV)


    A082779E02
  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to the ON position.

  1. Turn the intelligent tester on.

  1. Start and warm up the engine.

  1. Idle the engine.

  1. Select the menu items: Powertrain / Engine and ECT / Active Test / Activate the VVT System (Bank 1).

  1. Operate the OCV using the intelligent tester, then check the engine speed.

    Specified condition:
    Tester Operation
    Specified Condition
    OCV OFF
    Normal engine speed
    OCV ON
    Engine idles roughly or stalls soon after OCV switched from OFF to ON

    If the result is not as specified, check the oil control valve, wirings, and ECM.