Home › ENGINE ยท 2TR-FE › ENGINE CONTROL SYSTEM › MASS AIR FLOW METER

MASS AIR FLOW METER > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT INTAKE AIR FLOW METER SUB-ASSY
  1. Check the intake air mass in the mass air flow meter.

    1. Connect the intelligent tester to the DLC3.

    2. Start the engine.

    3. Turn the tester ON.

    4. Select the menu items:
      Power train / Engine and ETC / Data List / MAF, and read the intake air mass.

      Standard:
      Between 1.0 and 270.0 g/s

      If the result is not as specified, check the mass air flow meter, or wiring and ECM.