Home › RESTRAINTS › SEAT BELT › FRONT PASSENGER SEAT BELT WARNING LIGHT

FRONT PASSENGER SEAT BELT WARNING LIGHT > INSPECTION

for Preparation Click here



1. INSPECT CLEARANCE WARNING INDICATOR


    B102931E01
  1. Disconnect the H15 connector.

  1. Check the voltage and resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (E) - Body ground
    Always
    Below 1 Ω

    Standard voltage:
    Tester Connection
    Condition
    Specified Condition
    7 (BD) - Body ground
    Ignition switch OFF → ON
    Below 1 V → 10 to 14 V
    8 (DOSW) - Body ground
    Seat belt is unfastened, front passenger seat occupied → Seat belt is fastened, front passenger seat occupied
    10 to 14 V → Below 1 V