Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW CONTROL SYSTEM

POWER WINDOW CONTROL SYSTEM > DIAGNOSIS SYSTEM

for Preparation Click here



CHECK DIAGNOSIS
  1. Turn the ignition switch ON.

  2. Operate the power window master switch.



  3. B064900E01

    B064880E04

  4. Check the blinking pattern of the AUTO light as shown in the illustration.

    1. If pattern (A) displayed, reset power window regulator motor.

    2. If pattern (B) or (C) displayed, check the wire harness.

    3. If the normal pattern is displayed, replace the power window master switch.