Home › BODY › MIRROR › OUTER REAR VIEW MIRROR

OUTER REAR VIEW MIRROR > INSPECTION

for Preparation Click here



1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH


B111238E01
  1. Inspect the power mirror motor.

    1. Apply battery voltage and check operation of the outer rear view mirror.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 5 (MV)
      Battery negative (-) → Terminal 4 (COM)
      Turns upward (A)
      Battery positive (+) → Terminal 4 (COM)
      Battery negative (-) → Terminal 5 (MV)
      Turns downward (B)
      Battery positive (+) → Terminal 3 (MH)
      Battery negative (-) → Terminal 4 (COM)
      Turns left (C)
      Battery positive (+) → Terminal 4 (COM)
      Battery negative (-) → Terminal 3 (MH)
      Turns right (D)



    B111216E01
  1. Inspect the retract motor.

    1. Apply battery voltage and check operation of the outer rear view mirror.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Returns (Driving position)
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Retracts



2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH


B111239E02
  1. Inspect power the mirror motor.

    1. Apply battery voltage and check operation of the outer rear view mirror.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 5 (MV)
      Battery negative (-) → Terminal 4 (COM)
      Turns upward (A)
      Battery positive (+) → Terminal 4 (COM)
      Battery negative (-) → Terminal 5 (MV)
      Turns downward (B)
      Battery positive (+) → Terminal 3 (MH)
      Battery negative (-) → Terminal 4 (COM)
      Turns left (C)
      Battery positive (+) → Terminal 4 (COM)
      Battery negative (-) → Terminal 3 (MH)
      Turns right (D)



    B111216E01
  1. Inspect the retract motor.

    1. Apply battery voltage and check operation of the outer rear view mirror.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Returns (Driving position)
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Retracts