COOLANT > REPLACEMENT |
| 1. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug and engine drain plug, then drain the coolant.

Remove the radiator cap.
| 2. ADD ENGINE COOLANT |
Close the engine drain plug.
Close the radiator drain cock plug.
Slowly fill the cooling system with coolant.
Slowly pour coolant into the radiator reserve tank until it reaches the FULL line.
Install the radiator cap to the radiator reserve tank.
Press the inlet and outlet radiator hoses several times by hand while warming up the engine.
Stop the engine, and wait until the engine coolant cools down.
Add coolant to the FULL line of the radiator reservoir.
| 3. CHECK FOR ENGINE COOLANT LEAKS |