OIL PUMP > INSPECTION |
| 1. INSPECT TIMING BELT |
| 2. INSPECT TIMING BELT IDLER SUB-ASSEMBLY NO.1 |
| 3. INSPECT IDLER TENSION SPRING |
| 4. INSPECT WATER PUMP ASSEMBLY |
| 5. INSPECT OIL PUMP RELIEF VALVE |
![]() |
Coat the valve with engine oil and check that it falls smoothly into the valve hole by its own weight.
| 6. INSPECT OIL PUMP DRIVE GEAR |
Install the rotors to the timing gear case sub-assembly with the rotors marks facing outward. Check that the rotors revolves smoothly.
![]() |
Inspect the gear tip clearance.
Using a feeler gauge, measure the clearance between the drive and driven gear tips.
![]() |
Inspect the gear body clearance.
Using a feeler gauge, measure the clearance between the driven gear and timing gear case.
![]() |
Inspect the gear side clearance.
Using a feeler gauge and precision straight edge, measure the clearance between the gears and precision straight edge.