Home › ENGINE ยท 5L-E › STARTING › STARTER (for 2.2kW Type)

STARTER (for 2.2kW Type) > INSTALLATION

for Preparation Click here



1. INSTALL STARTER ASSEMBLY
  1. Install the starter with the 2 bolts and nut.

    Torque:
    69 N*m{ 700 kgf*cm , 51 ft.*lbf }

  1. Install the stay with the 2 bolts and nut.

    Torque:
    69 N*m{ 104 kgf*cm , 51 ft.*lbf }

  1. Connect the 30 terminal with the nut.

    Torque:
    9.8 N*m{ 100 kgf*cm , 7 ft.*lbf }

  1. Install the terminal cap.

  1. Connect the starter connector.